Refinishing the hardwood floors in your home can drastically alter the appearance of your interior décor. Despite the durable nature of wood floors, dullness, scratches, water stains, and areas of wear due to household traffic can be signs that it is time to take on a refinishing project. Unfortunately, many people find refinishing wood floors to be an intimidating task, but if you follow a few simple tips, you can reclaim the beautiful wood floors that you once knew.
Move Out Your Furniture
One of the most important tips to take into consideration before you refinish your wood floors is to disassemble furniture inside of the room in order to remove it for your project. Furniture disassembly can be a daunting task, so consider hiring a professional to ensure items are disassembled safely and without damage.
Make Sure Your Floors are Clean
Before you start doing any work on your floors, it is helpful to ensure that they are clean. Once your furniture has been removed, spray down your floor with a cleaner designed for hardwood floors. You can also make your own cleanser using one part white vinegar to every ten parts water. Use a terry-cloth mop to gently wipe down the floor, and make sure that all windows and doors are closed so that you can contain any dust that may start flying when you begin sanding.
If your wood floors have scratches, stains, and discolorations, you will want to sand them down. To begin, use coarse sandpaper from between 20- and 36-grade, and then gradually move up toward fine grit sandpaper with a grade of 100-120. You can also use a sander, and as a sanding novice, an orbital sander may be your best choice. However, before you start using the sander, make sure that you practice, and keep the sander moving constantly in order to prevent uneven surfaces.
Apply the Stain
Most hardwood floor professionals suggest only doing one coat of stain on your flooring, as two coats may result in more stain being absorbed into certain areas of the floor than others. Be sure to wear rubber gloves during this process to prevent the stain from getting under your nails. It is also important to consider the color of your stain carefully, as dark colored woods will easily pick up the presence of dirt and lint.
When applying polyurethane, consider using a three inch brush with a lamb’s wool applicator. Apply several coats, and give the floor 24 hours to dry in between each coat. Don’t replace your furniture until the polyurethane has fully cured, which can be about three days for water-based poly and approximately one week for oil-based polyurethane.
Refinishing your hardwood floors doesn’t have to be a complicated process, and if done right, it is something that you can complete on your own. Don’t forget, Furniture movers NYC can help you to move furniture out of your room without injury so that you can create beautiful, new wood floors.